Highly precise up to ± 1 µm, diameter up to 8 mm, vibration resistant and dust proof, high protection class up to IP66
Please notice that there is a limit of 5 products for the product comparison.
Your latest selection was canceled.
×
Model | 8738-DK805, DK812 |
Principle | Incremental |
Measuring range |
0 … 5 mm |
Resolution | 0.1 µm |
Signal output | TTL |
Protection class | IP66 |
Range of operating temperature | 0 ... +50 °C |
Excitation voltage | 5 V ± 5 % |
Electrical connection | Shielded cable |
Return spring | Yes |
Specific characteristics |
|
Incremental magnetic measuring heads offer maximum precision over the full range of measurements. As a result of the magnetic operating principle and the robust mechanical construction, they are insensitive to soiling and are therefore ideally suited to use in production facilities. Thanks to the high quality of their measurements, their high protection and long service life, these sensors are used in many technologies (industry, research, development etc.).
Typical applications include:
The incremental displacement sensors are based on a magnetic principle: consisting of a magnetic scale and a multi-slot reading head that responds to changes in magnetic flux, they detect linear movements with high precision and resolution.
The scale of ferromagnetic alloy – or magnetic tape – is magnetized by an alternating magnetic field with a pole spacing of 0.2 mm. A special recording head and a laser measurement system guarantee that the graduations are very precise. From the magnetic pattern on the scale, the multi-slot reading head generates a signal proportional to the movement.
The analog signal generated by the reading head is electronically divided and digitized. Changes in length can be measured with a resolution of from 1 μm down to 0.1 μm.
Thanks to its slim shape with a diameter of 8 mm and its high accuracy over the full range of measurements, model 8738 DK is particularly suitable for use in multi-point measuring equipment. The spindle and spindle guide are protected from dust by a bellow.
Talstr. 1-5
76593 Gernsbach
Germany
Fon: +49 7224645-0
Fax: +49 7224645-88
infoburster.com
www.burster.com
Wire
15.04. -
19.04.24 -
Düsseldorf,
40474,
Germany
The Battery Show
18.06. -
20.06.24 -
Stuttgart,
70269,
Deutschland
burster gmbh & co kg
sensors & precision measurement
Talstr. 1-5
76593 Gernsbach
GERMANY
Contact:
Phone: (+49) 07224-6450
Fax: (+49) 07224-64588
E-Mail:
infoburster.de
The measurement solution.
It‘s with this ambition and for over half a century burster, a global player in the precision measurement technology industry, supplies some of the world’s most recognizable brands with sensors, precision measuring devices and measuring systems for sensor signaling processing. This is all done through our research, development and production headquarters in Germany.
Where quality assurance and production control play a significant role, burster is on board.