9221 Modulo PROFIBUS

per forza, pressione e coppia torcente, configurazione semplice mediante interfacia RS232, connessione via PROFIBUS DP, memoria MIN / MAX, limiti

Richiedi prodotto

    Confronta prodotto

      • Features

        • Per misure di forza, pressione o coppia torcente con sensori strain gauge, sensori di spostamento potenziometrici e sensori angolari o segnali standard ± 10 V
        • Risoluzione16 bit, frequenza di campionamento fino a 1 kHz
        • 2 ingressi liberi configurabili esempio reset, tare, etc.
        • Semplice configurazioe mediante interfaccia RS232
        • Networking mediante PROFIBUS DP fino a 12 MBaud
        • Valore medio, memoria MIN/MAX, valori di set point, compensazione dello zero mediante PROFIBUS
        • Modalità DPV1 per la parametrizzazione e backup via PROFIBUS
        • Ingresso a potenziale libero tramite amplificatore differenziale
      • Product data

        Model 9221
        Measurement accuracy < 0.03 % F.S.
        Sample rate 1 kHz
        Type of sensor

        • Strain gauge
        • Potentiometer
        • Analog standard signals
        Interfaces

        • RS232
        • PROFIBUS
        Indicator 3 LEDs (red, yellow, green)
        Sensor excitation

        Strain gauge:

        • 2.5 V
        • 5 V
        • 10 V

        Potentiometer:

        • 2.5 V
        • 5 V
        • 10 V

        Analog standard signal:

        • 0 V … ± 10 V
        Protection class IP20 / IP65
        Supply voltage

        20 ... 36 VDC
        14 ... 26 VAC

        Specific characteristics

        • For force, pressure or torque measurement with strain gauge sensors, potentiometric displacement and angle sensors or standard signals ± 10 V
        • Resolution 16 bit
        • 2 free configurable inputs e.g. reset, tare, etc.
        • Networking via PROFIBUS DP up to 12 MBaud
        • Mean value, MIN/MAX memory, set point values, zero compensation via PROFIBUS
        • DPV1 mode for parameterizing and backup via PROFIBUS
        • Potential-free input via differential amplifier
      • Description

        The newly developed sensor PROFIBUS module model 9221 is predestined for the integration of various analog sensor output signals into complex, net worked and peripheral automation structures. This module finds its fields of application in the industrial automation technology as well as the test rig technology based on its secure and reliable transfer mode, the fast transfer speed and its simple construction.

        The inputs (e.g. PLC signal gauge) and outputs in addition to the external control allow a zero compensation by trigger via proximity switch or fast alerting on passing of set point values. Industrial type connection and mounting techniques enable the user the adaption and integration in the existing mechanical and electrical environment.

        The excellent quality of measurement together with the high grade capture of mean values also enable the application in research and development.

        The use of standardized PROFIBUS protocols makes the connection an easy task for the programmer.

        Specific applications are found e.g. in:

        • Complex gear and engine test rigs
        • Weight definition in high-rack facilities
        • Automotive industry
        • Special equipment construction
        • Packing industry
        • Manufacturing technology
        • Capture of various mechanical and physical values in test rigs

        The universal sensor PROFIBUS module is well-suited for measurement of mechanical values such as e.g. force, torque, pressure, acceleration, displacement and angle. Strain gauge, potentiometric and standard signals may be captured and processed without problems. A powerful 16 bit A/D converter ensures a precise and fast processing of analog sensor signals.

        The module itself features a stable and precise sensor excitation voltage. The calibration and configuration data are memorized on an EEPROM, protected against zero voltage.

        The user friendly configuration software makes a simple conditioning of input signals and the setup of parameters on the module with regards to the PLC and PROFIBUS parameters possible. The version DPV1 enables the parameterization and backup function via PROFIBUS. Functions such as the arithmetical calculation of mean values, input signal filtering, zero adjustment, MIN/MAX memory and limits setpoint values can be realized with a speed of up to 12 MBaud via PROFIBUS.

        Two potential-free and freely configurable digital inputs are available for the external PLC control (e.g. erase MIN/MAX memory, tare function). Two digital outputs can be defined as local limits switches for alerting functions.

        The bus-sided control of the sensor lines on fractures or short-circuits and the galvanic separation between the PROFIBUS-ASIC and the PROFIBUS connector belong to the standard features.

        The visualization of operating conditions such as bus connection, sensor-sided errors or active state of module are realized by three LEDs.

        The DIN standard mounting rail enables an easy installation into the control cabinet.

      • Data Sheet & Downloads

        Data sheet
        Operation manual
        Software
      • Accessories

        pdf Integrated amplifier
      • Press information

        Fast, Agile, Precise and Sturdy for Any Application

        In many sectors of the field bus related industrial automation a speedy and safe process control with a high measuring accuracy is requested more than ever. The Sensor PROFIBUS Interface model 9221 is a module that burster presents for the…

      • Anwendungsbeispiele

        Displacement measurement: real-time monitoring

        in the plastics industry

        Fill level measuring and level monitoring

        in a completed system

        Measurement of mechanical values

        at a completely automated motor vehicle test bed

        Measuring pressing forces in machine tools

        miniature ring load cell

        Measuring the internal tool pressure

        pressure transducer

        Measuring the supporting force in utility vehicles

        Ring load cell

        Tension measurement

        in paper manufacture processes

        Torque measurement on a fill facility

        with monitoring and controlling system

        Torque measurements

        in an innovative technique for efficient energy generation

        Weight measurement

        on a fill facility with monitoring and controlling system

      Related products



      Riferimenti

      MECSPE

      Nuova brochure: Press-fitting - the reliable way

      Scoprite la nuova brochure Press-fitting - the reliable way. Controllo di qualità al 100% per le operazioni di pressatura manuale con molti esempi applicativi e informazioni focalizzate sul prodotto!

      Download our new brochure

      Brandnew: Torque Measurement Brochure

      Scoprite la nostra nuova brochure Torque Sensor con molti esempi applicativi e informazioni focalizzate sul prodotto!

      Download our new brochure

      burster in Italy

      Italy

      burster Italia S.r.l.

      Via Repubblica, 10
      24035 Curno
      Italy

      Fon: +39/035/618120
      Fax: +39 035618250
      infoburster.it
      www.burster.it

      SERVICES

      • Qualified design, application support
      • Process optimization
      • Qualified integration support & training
      • On-site trouble shooting
      • Qualified phone & online support
      • Local calibration service

      Trade fairs

      MEC-SPE
      09.06. - 11.06.22 - Bologna, 40128, Italy  

      ×
      © 2022 // burster Italia s.r.l.
      nach oben