8511 Cella di carico a flessione

• Features

  • For tension and compression forces
  • Measuring ranges from 0 ... 5 N to 0 ... 2 kN
  • Relative non-linearity: ≤ ±0.1 % F.S.
  • Very low mounting height
  • Simple force application
  • Material aluminium or stainless steel
  • Special design on request

• Product data

  Model	8511
  Measuring range	0 … 5 N 0 … 10 N 0 … 20 N 0 … 50 N 0 … 100 N 0 … 200 N 0 … 500 N 0 … 1000 N 0 … 2000 N
  Direction of force	Tension and compression
  Standardization	Option
  Signal output	1 mV/V 1.5 mV/V depending on measuring range
  Protection class	IP54
  Overload protection	Option
  Range of operating temperature	-30 ... +90 °C
  Specific characteristics	High linearity up to 0.1 % Very low mounting height Simple force application Material aluminium or stainless steel Special design on request

• Description

  Model 8511 bending beam load cells are designed for measuring tension and compression forces. Their high accuracy, low torque sensitivity and very low mounting height make these sensors particularly suitable for use in weighing and dosing technology as well as for laboratory and production use.
  
  Extremely simple force application makes the sensor easy to handle. It offers a very favorable price/performance ratio and can be used universally for static and dynamic measurements.
  
  Examples of application:

  • Dosing system
  • Load deflection curve
  • Tension force measurement for wire or thread winders
  • Friction forces
  • Cable force
  • Withdrawal force, etc

  The measuring element of this load cell consists of a double bending beam with strain gauges, the resistance of which changes with the application of force. Upon applying a voltage to the strain gauge bridge, the change in the strain gauge resistance is converted into output voltage, which is directly proportional to the force. The strain gauges and the entire measuring element are protected from water spray by rubber bellows.
  
  To install the load cell, it is securely clamped on the side with 2 bore holes. The tension or compression force to be measured is applied at the other end. Force is applied easily perpendicular to the sensor axis. This serves to prevent falsification of the measured values. The influence on the measuring signal resulting from the increase of load distance on the mounting side (e.g. by a touch finger) is negligible. Overload protection can be realized with little effort using a mechanical stop.

• Data Sheet & Downloads

  Data sheet

  8511

  DEENPL

  Brochure

  Load sensors for production, automation, R&D and quality assurance

  DEEN

  Operation manual

  8511

  DEEN

  Further info

  Load experts

  DEEN

• Videos

  Example showing tightly-packed assembly of bending-beam load cells with overload protection

  
  

  Youtube channel

• LINKS & CAD DATA

  CAD data model 8511

  CAD data accessories for load cells

Related products

Amplficatore di strumentazione 9250/9251

SENSORMASTER 9163

9206