9236 Amplificatore multicanale per sensori strain gauge

• Features

  • Fino a 4 canali di misura
  • Uscita in tensione 0 a ± 5 V / 0 a ±10 V
  • Protezione contro connessione inversa e corto-circuiti
  • Disponibile anche come scheda con circuito stampato senza custodia
  • Configurazione semplice mediante DIP switch
  • Elevato grado di protezione fino a IP67

• Product data

  Model	9236
  Measurement error	0.1 % F.S.
  Type of sensor	Strain gauge
  Interfaces	At screw terminal
  Sensor excitation	2.5 V
  Protection class	IP20 / IP67
  Supply voltage	15 ... 30 VDC
  Measurement channels	2-4
  Specific characteristics	Voltage output 0 to ± 5 V / 0 to ±10 V Protected against reverse connection and short-circuit Also available as circuit board without housing Simple configuration using DIP switch High degree of protection up to IP67

• Description

  The input range of the cost-effective amplifier is appropriate for sensitivities between 0.5 and 30 mV/V and is also suitable for semiconductor strain gage. The measuring amplifier itself is powered by voltages between 15 V and 30 V. Internally, the highly accurate, short-circuit protected sensor excitation voltage is generated and used to supply the sensor‘s measuring bridge.

  The analog output voltage can be set to a range from 0 to ±5 V or 0 to ±10 V. Alternatively, customer-specific settings are possible. DIP switches are used to set the input range. Fine adjustments and zero point setting are performed by means of multi-turn potentiometers that are mounted on the circuit board. The sensors are connected, and the auxiliary power supplied, through user-friendly screw terminals.

  The amplifier in the IP67 version can, if in fact necessary, be achieved by clamping, gluing, or with the aid of a cable tie. The open circuit board has mounting holes for easy assembly. The amplifier‘s limit frequency is 1 kHz.

  Various housing variants are available. For field use, the IP67 variant with PG screw connection or, alternatively, with an M12 connector on the output side is available. The pluggable version allows for quick and easy installation and removal. Since the sensor is permanently connected to the measuring amplifier, the measuring chain can be installed as a whole. For mounting the measuring amplifier in the control cabinet, we recommend the 2-channel, 3-channel, or 4-channel DIN rail version. For use in the laboratory or as an OEM product, the pure circuit board version can be selected.

• Data Sheet & Downloads

  Data sheet

  9236

  DEEN

  Operation manual

  9236

  DEEN

• Accessories

  Integrated amplifier

  DEEN
  Multichannel mount for instrumentation amplifier Model 9236-V0xx and Model 9206-V0xxx

  DEEN

Related products

8402

8416

8523

8526

Compensation