Measurement of mechanical values

at a completely automated motor vehicle test bed

  • High accuracy
  • Rapid measuring value collection
  • Configuration via PROFIBUS 


On a completely automated test bed motor vehicle seats should be checked for their encumbrance. The following features should be tested and recorded:

  • Adjusting angle of the back
  • Torque required for turning handle
  • Total weight of the seat (with and without dummy)
  • End position determination

In order to be able to make a well defined statement about the categorization of the motor vehicle seat, the measurement data must be recorded and networked and deposited together as test result on the PROFIBUS level.


All test data should be transferred at the same time for storage, in order to obtain relevant samples of information for comparative logging of this test. A tare function is a consideration for mounted sensors addressing the issue concerning initial load (dummy load).


For the recording of all mechanical values following sensors are used:

  • Adjusting angle of the back → angular displacement sensor model 8820
  • Torque of the turning handle → torque sensor model 8661
  • Total weight of the seat → 2 load cells model 8526
  • End position determination → displacement sensor model 8719

All sensor signals are recorded by 4 individual Sensor Profibus Modules 9221. Concomitantly the modules display the sensors with voltage and evaluate their signals. The transferring of measurement data takes place in parallel via PROFIBUS. The tare activation concerning a possible initial load, which can be modelled as a dummy, takes place directly via simple PLC unit communication, over PROFIBUS.

Go to product 9221
Go to product 8661
Go to product 8820
Go to product 8526
Go to product 8710, 8711



burster in Italy


burster Italia S.r.l.

Via Repubblica, 10
24035 Curno

Fon: +39/035/618120
Fax: +39 035618250


  • Qualified design, application support
  • Process optimization
  • Qualified integration support & training
  • On-site trouble shooting
  • Qualified phone & online support
  • Local calibration service

Trade fairs

23.09. - 24.09.20 - Pordenone, Italia  


Richiedi prodotto

    Confronta prodotto

      COILTECH 2020

      Venite a trovarci!
      COILTECH 2020
      23-24  Settembre - Pordenone (PN)

      STAND 6-B01

      Scopri i nostri nuovi prodotti!

      Nuovissima brochure: Celle di Carico

      Scopri la nostra nuova brochure Celle di carico per produzione, automazione, R&D e controllo qualità con molti esempi applicativi e informazioni focalizzate sul prodotto!

      Scarica la nostra nuova brochure

      Nuova brochure: Press-fitting - the reliable way

      Scoprite la nuova brochure Press-fitting - the reliable way. Controllo di qualità al 100% per le operazioni di pressatura manuale con molti esempi applicativi e informazioni focalizzate sul prodotto!

      Download our new brochure

      Brandnew: Torque Measurement Brochure

      Scoprite la nostra nuova brochure Torque Sensor con molti esempi applicativi e informazioni focalizzate sul prodotto!

      Download our new brochure

      © 2020 // burster Italia s.r.l.