RESISTOMAT® 2320 Milliohmmetro portatile a batterie

Selezione automatica del campo di misura, temperatura compensata, risoluzione fino a 10 µΩ, precisione 0.05 % rdg.

Richiedi prodotto

    Confronta prodotto

      • Features

        • Campo di misura da 40 mΩ a 4 kΩ
        • Risoluzione fino a 10 μΩ
        • Precisione di misura 0.05 % Rdg.
        • Autorange
        • Temperatura compensata
        • Misura bipolare
        • Protezione da tensione di ingresso fino a 415 Vrms
      • Product data

        Model 2320
        Measuring range

        40.00 mΩ
        400.0 mΩ
        4.000 Ω
        40.00 Ω
        400.0 Ω
        4.000 kΩ

        Resolution

        10 μΩ
        100 μΩ
        1 mΩ
        10 mΩ
        100 mΩ
        1 Ω

        Measurement accuracy < ± 0.05 % rdg.
        Measurement display 4000 counts
        Automatic temperature compensation Yes
        Comparator No
        Interfaces No
        Specific characteristics

        • Autorange
        • Temperature compensation
        • Bipolar measurement
        • Input voltage protection up to 415 Vrms
      • Description

        The RESISTOMAT® model 2320 is a universally applicable and easy to operate measurement device for low-ohmic resistances. The light and handy device in a stable IP54 plastic housing with membrane keypad is likewise suitable for use in service, laboratory or on the production floor. The power supply is done via built-in rechargeable battery packs or by standard batteries.

        If need be, the temperature of samples can be measured and the sample resistance is subsequently compensated to fit the value at 20°C. This applies for samples with resistances depending on the sample’s temperature. The temperature coefficients for copper and aluminium are included as standard. A third and fourth coefficient may be set individually for any given material to be measured.

        The application range is manifold, such as measurement of:

        • resistance elements
        • plug connections
        • power rails
        • fuses
        • cable connections
        • transformers
        • electrical motors
        • cable and wire, and many more

        The 4-wire measurement configuration eliminates possible errors caused by test lead and contact resistance. This is the basis for resistance measurements in the mΩ range. The resistance value calculated in the current voltage method is then indicated on the large LCD display in mΩ, Ω or kΩ.

        Single as well as permanent measurements are possible whereby the 6 measurement ranges can be selected in manual or automatic mode. The standard resistance value at 20 °C is calculated and displayed if the temperature compensation is active. The measured temperature may also be displayed directly.

        Thermo voltages are eliminated by the bipolar current source and the calculation of the mean value (key AVE).

        Low battery charge is informed through the LED "LOBAT". The battery pack can be replaced in a very simple manner. Recharging is done in an external station.

      • Data Sheet & Downloads

        Data sheet
        Further info
      • Accessories

        pdf Pt100 sensor for plug-in
        pdf Rechargeable battery pack with external docking station and charger
        pdf Carrying bag
        pdf 5 pin connector for Pt100 input


      Riferimenti

      MECSPE

      Nuova brochure: Press-fitting - the reliable way

      Scoprite la nuova brochure Press-fitting - the reliable way. Controllo di qualità al 100% per le operazioni di pressatura manuale con molti esempi applicativi e informazioni focalizzate sul prodotto!

      Download our new brochure

      Brandnew: Torque Measurement Brochure

      Scoprite la nostra nuova brochure Torque Sensor con molti esempi applicativi e informazioni focalizzate sul prodotto!

      Download our new brochure

      burster in Italy

      Italy

      burster Italia S.r.l.

      Via Repubblica, 10
      24035 Curno
      Italy

      Fon: +39/035/618120
      Fax: +39 035618250
      infoburster.it
      www.burster.it

      SERVICES

      • Qualified design, application support
      • Process optimization
      • Qualified integration support & training
      • On-site trouble shooting
      • Qualified phone & online support
      • Local calibration service
      ×
      © 2024 // burster Italia s.r.l.
      nach oben