TRANS CAL 7281 Calibratore portatile ad alta precisione e dispositivo di prova per misure elettriche e meccaniche

• Features

  • Sensori supportati: Strain gauge/segnale normalizzato ± 5V, ± 10 V, sensori potenziometrici
  • Test del dispositivo: Simulatore di Strain gauge fino a ± 50 mV/V
  • Easy adjustment through burster TEDS
  • Eccellente linearità con non-linearity < ± 0.001 %
  • Memoria fino a 16 programmi di misura
  • Data logger fino a  30.000 misurazioni
  • Certificato di calibrazione burstr e / o Certificato di calibraizone tracciabile con standard Tedesco DKD / DakkS opzionale disponibile per il solo sturmento / intera catena di misura

• Product data

  Model	7281
  Measurement accuracy	< ± 0.001 % F.S.
  Sample rate	0.1 … 1200/s (DC) 0.1 … 2/s (AC)
  Type of sensor	Strain gauge Potentiometer Transmitter Sensors and devices with voltage output
  Interfaces	USB 2.0
  Sensor excitation	Strain gauge: DC: 2.5 V / 5 V (for 120 Ω only 2.5 V) AC: 2.5 Veff / 5 Veff (from 350 Ω) Potentiometer: 5 VDC Transmitter: 12 VDC ± 5 %
  Protection class	IP40
  Supply voltage	10 ... 28 VDC
  Reference measurement device	Yes
  Sensor test	Yes
  Device test	Yes
  Strain gauge simulator	Yes
  Data logger	Yes
  Electronic sensor data sheet	Yes
  Connection type	4 / 6 wire connection
  Measurement programs	16
  Specific characteristics	Device test: Strain gauge simulator up to ± 50 mV/V Easy adjustment through burster TEDS Storage of up to 16 measurement programs Data logger for up to 30.000 measurements Factory calibration certificate and / or German accredited DKD / DakkS calibration certificate optionally available for the instrument / entire measurement chain

• Description

  The multipurpose digital indicator TRANS CAL 7281 can be used wherever there is a need to perform high-precision, in-situ calibrations of sensing components used in equipment such as presses, torque tools or pressure-regulating systems. An optional factory calibration certificate or German-accredited DKD/DAkkS calibration certificate can be provided when the measurement device needs to be used as a reference. This provides a quick and cost-effective way of assessing a system with traceable documentation of measurement results.

  If a reference measurement cannot be made because the sensor location is difficult to access, it is still possible to test the zero point, the input, output and isolation resistance as well as the calibrating offset of the fitted sensor. It is also possible to check the indicating device by measuring the excitation voltage and simulating the characteristic values (mV/V or V) of the sensor used.

  The instrument is used in metrology institutes, calibration laboratories and in industry in the fields of quality assurance, facility commissioning and system monitoring.

  Areas of use:

  • Checking hydraulic presses
  • Reference measurements in assembly lines
  • Test of robotic pressing forces
  • Calibrating test equipment
  • Calibrating of high-precision measuring devices

  The TRANS CAL 7281 can be fitted with standard or rechargeable batteries for portable use or can run from an external power supply. Combined with a reference sensor the testing device provides a high-precision reference measurement chain e.g. for force measurements, but is also ideal for service engineers as a tool for locating faults in device or sensors.

  The choice of sensors includes strain gauge, normalizedsignal ± 5 V / ± 10 V and potentiometric sensors. The LCD graphics display shows the live measurement value and the corresponding bar indicator. It also supports display functions such as data-logger, tared value in % and upper/lower limit for the comparator with simultaneous indicator (< = >) of the evaluation result.

  For routine testing and also fault-locating tasks, the tester makes it really simple to measure isolation resistances and input/output resistances. The equipment test function is a quick and easy way to verify that the display device complies with the characteristic value, offering strain-gage simulation of up to ± 50 mV/V or output of a normalized signal of up to 10 V. German-accredited DKD/DAkkS calibration certificates or factory calibration certificates are optionally available. The DigiCal configuration and data-acquisition software provides useful display and reporting functions.

• Data Sheet & Downloads

  Data sheet

  7281

  DEENPL

  Operation manual

  7281

  DEENCZ

  Software

  USB driver 7281

  ZIP

  DigiCal

  DEEN

  Further info

  High-precision calibrator and test device

  DEEN

  On-site calibration with TRANS CAL 7281

  DE

• Accessories

  Aluminium case for TRANS CAL 7281 and accessories

  DEEN

• Videos

  Please accept marketing-cookies to watch this video.

  Motek exhibition video burster 2015

  Please accept marketing-cookies to watch this video.

  burster Calibration to go Control 2015

  
  

  Youtube channel

• Anwendungsbeispiele

  

  Calibrating a hydraulic press

  using a reference measurement

  Detail

  

  Flight testing

  of a paraglider

  Detail

Related products

8416

8527

DKD

Compensation