RESISTOMAT® 2320 Milliohmmetro portatile a batterie

Selezione automatica del campo di misura, temperatura compensata, risoluzione fino a 10 µΩ, precisione 0.05 % rdg.

  • Features

    • Campo di misura da 40 mΩ a 4 kΩ
    • Risoluzione fino a 10 μΩ
    • Precisione di misura 0.05 % Rdg.
    • Autorange
    • Temperatura compensata
    • Misura bipolare
    • Protezione da tensione di ingresso fino a 415 Vrms
  • Product data

    Model 2320
    Measuring range

    40.00 mΩ
    400.0 mΩ
    4.000 Ω
    40.00 Ω
    400.0 Ω
    4.000 kΩ

    Resolution

    10 μΩ
    100 μΩ
    1 mΩ
    10 mΩ
    100 mΩ
    1 Ω

    Measurement accuracy < ± 0.05 % rdg.
    Measurement display 4000 counts
    Automatic temperature compensation Yes
    Comparator No
    Interfaces No
    Specific characteristics
    • Autorange
    • Temperature compensation
    • Bipolar measurement
    • Input voltage protection up to 415 Vrms
  • Description

    The RESISTOMAT® model 2320 is a universally applicable and easy to operate measurement device for low-ohmic resistances. The light and handy device in a stable IP54 plastic housing with membrane keypad is likewise suitable for use in service, laboratory or on the production floor. The power supply is done via built-in rechargeable battery packs or by standard batteries.

    If need be, the temperature of samples can be measured and the sample resistance is subsequently compensated to fit the value at 20°C. This applies for samples with resistances depending on the sample’s temperature. The temperature coefficients for copper and aluminium are included as standard. A third and fourth coefficient may be set individually for any given material to be measured.

    The application range is manifold, such as measurement of:

    • resistance elements
    • plug connections
    • power rails
    • fuses
    • cable connections
    • transformers
    • electrical motors
    • cable and wire, and many more

    The 4-wire measurement configuration eliminates possible errors caused by test lead and contact resistance. This is the basis for resistance measurements in the mΩ range. The resistance value calculated in the current voltage method is then indicated on the large LCD display in mΩ, Ω or kΩ.

    Single as well as permanent measurements are possible whereby the 6 measurement ranges can be selected in manual or automatic mode. The standard resistance value at 20 °C is calculated and displayed if the temperature compensation is active. The measured temperature may also be displayed directly.

    Thermo voltages are eliminated by the bipolar current source and the calculation of the mean value (key AVE).

    Low battery charge is informed through the LED "LOBAT". The battery pack can be replaced in a very simple manner. Recharging is done in an external station.

  • Data Sheet & Downloads

    Data sheet
    Further info
  • Accessories

    pdf Pt100 sensor for plug-in
    pdf Rechargeable battery pack with external docking station and charger
    pdf Carrying bag
    pdf 5 pin connector for Pt100 input


Riferimenti

Richiedi prodotto

    Confronta prodotto

      COILTECH 2019

      Venite a trovarci!
      COILTECH 2019
      25-26  Settembre - Pordenone (PN)

      Scopri i nostri nuovi prodotti!

      Scopri la nostra nuova brochure Celle di carico per produzione, automazione, R&D e controllo qualità con molti esempi applicativi e informazioni focalizzate sul prodotto!

      Scarica la nostra nuova brochure

      Scoprite la nuova brochure Press-fitting - the reliable way. Controllo di qualità al 100% per le operazioni di pressatura manuale con molti esempi applicativi e informazioni focalizzate sul prodotto!

      Download our new brochure

      Scoprite la nostra nuova brochure Torque Sensor con molti esempi applicativi e informazioni focalizzate sul prodotto!

      Download our new brochure

      © 2019 // burster Italia s.r.l.
      nach