RESISTOMAT® 2316 Milliohmmetro per produzione e laboratorio

Risoluzione fino a 0.1  µΩ,  precisione 0.03 % Rdg., temperatura compensata per tutti i tipi di materiali, interfaccia standard RS232 (USB opzionale)

  • Features

    • Campo di misura da 2 mΩ a 200 kΩ
    • Risoluzione fino a 0.1 μΩ
    • Precisione 0.03 % Rdg.
    • Autorange
    • Temperatura compensata per tutti i tipi di materiale
    • Compensazione termica e.m.f.
    • Protezione da tensione di ingresso 400 Vrms
    • Interfaccia RS232 e PLC  (USB e Ethernet opzionale)
  • Product data

    Model 2316
    Measuring range

    • 2 mΩ
    • 20 mΩ
    • 200 mΩ
    • 2 Ω
    • 20 Ω
    • 200 Ω
    • 2 kΩ
    • 20 kΩ
    • 200 kΩ

    • 0.0001 mΩ
    • 0.001 mΩ
    • 0.01 mΩ
    • 0.0001 Ω
    • 0.001 Ω
    • 0.01 Ω
    • 0.1 Ω
    • 1 Ω
    • 10 Ω
    Measurement accuracy 0.03 % rdg.
    Measurement display 21 000 counts
    Automatic temperature compensation Yes
    Comparator Yes

    • RS232
    • PLC
    • USB (option)
    • Ethernet (option)
    Specific characteristics

    • Autorange
    • Temperature compensation for all materials
    • Thermal e.m.f. compensation
    • Input voltage protection up to 400 Vrms
  • Description

    Fast and accurate measurements of the smallest resistance values are possible with the milliohmmeter RESISTOMAT® model 2316. Due to the rugged aluminium injection moulding desktop housing with membrane keypad it is suitable for use in laboratory and industrial environment likewise. Wires and coils can be measured with temperature compensation. The temperature of the sample is measured with a Pt100 or pyrometer and the resistance is then corrected to the equivalent at e.g. 20 °C (adjustable) in the instrument.

    The application range is very wide such as the measurement of:

    • transformer motor coil windings
    • coils of all kind
    • cables and wires on the drum or as meter samples
    • switch and relay contacts
    • heating elements
    • fuses
    • connections and transitions at power rails and many more

    For a cooling curve recording with freely selectable time interval a data logger for up to 1000 values is available. The complete control via RS232 interface enables the setup of fully automatic test stations. The instrument features a PLC interface for integration into production process control classification and makes selection of the samples an easy task.

    The device works according to the proven 4-wire measurement method which eliminates errors caused by test lead and contact resistances. Thermo voltages that might be in the measurement circle would be compensated automatically by this measurement method. The control of the measurement leads is done with an integrated cable fraction detection.

    A temperature compensation for any given sample material such as copper, aluminium, tungsten, etc. is self-evident. The temperature measurement is done by an external Pt100 sensor or by an external infrared measurement device (ref. to accessories). A special measurement voltage input protection was developed for testing large inductive samples so that voltage peaks do not cause permanent damage while pinching off the sample.

    16 device settings such as the measurement range, limit values, temperature coeffi cient, etc. can be saved in order to test samples with different parameters in an automatic measurement system. All device specifi c settings are shown to the user via display. Calling up the settings is done via keypad or via PLC interface with a bit pattern (4-bits). It goes without saying that all device settings may also be effected via the available interfaces. 

    The high-contrast LCD display with backlight assures very good reading of the measurement value in dark as well as bright spaces.

  • Data Sheet & Downloads

    Data sheet
    Operation manual
    Further info
  • Accessories

    pdf 19“-3U rack mounting kit
    pdf Program selection switch
    pdf External foot switch
    pdf Infrared temperature module
    pdf Measurement leads, 4 pin
    pdf Pt100 temperature sensor for RESISTOMAT®
    pdf Adapter for the calibration resistors series 1240
  • Videos

    Clamping devices for stranded copper cables, aluminium and copper wires

    Wire 2016 Exhibition Video

    Youtube channel Burster Youtube Channel

  • Press information

    New allround device for resistance measurement leaves nothing to be desired

    Resistance measurement and RESISTOMAT® are both terms that indispensably belong together. burster presents with its good value RESISTOMAT® 2316 a tough, universal and compact resistance measurement device that suits to applications in rough industry…

Related products


burster in Italy


burster Italia S.r.l.

Via Repubblica, 10
24035 Curno

Fon: +39/035/618120
Fax: +39 035618250


  • Qualified design, application support
  • Process optimization
  • Qualified integration support & training
  • On-site trouble shooting
  • Qualified phone & online support
  • Local calibration service

Trade fairs

23.09. - 24.09.20 - Pordenone, Italia  



Lösungen Bild


Cable Industry

Richiedi prodotto

    Confronta prodotto

      COILTECH 2020

      Venite a trovarci!
      COILTECH 2020
      23-24  Settembre - Pordenone (PN)

      STAND 6-B01

      Scopri i nostri nuovi prodotti!

      Nuovissima brochure: Celle di Carico

      Scopri la nostra nuova brochure Celle di carico per produzione, automazione, R&D e controllo qualità con molti esempi applicativi e informazioni focalizzate sul prodotto!

      Scarica la nostra nuova brochure

      Nuova brochure: Press-fitting - the reliable way

      Scoprite la nuova brochure Press-fitting - the reliable way. Controllo di qualità al 100% per le operazioni di pressatura manuale con molti esempi applicativi e informazioni focalizzate sul prodotto!

      Download our new brochure

      Brandnew: Torque Measurement Brochure

      Scoprite la nostra nuova brochure Torque Sensor con molti esempi applicativi e informazioni focalizzate sul prodotto!

      Download our new brochure

      © 2020 // burster Italia s.r.l.