8710, 8711 Potentiometric displacement sensors

For direct and accurate measurement of mechanical displacements, lateral force-free drive, very long life duration, high displacement speed

Product Inquiry

    Product comparison

      • Features

        • Measurement ranges 0 ... 25 mm to 0 ... 150 mm
        • Non-linearity: max. ± 0.05 %
        • Service life: 108 movements
        • Displacement speed: up to 10 m/s
        • Drive free of lateral forces caused by ball joint coupling
        • Integrated cable or plug connection
      • Product data

        Model 8710, 8711
        Principle Potentiometric
        Measuring range

        0 … 25 mm
        0 … 50 mm
        0 … 75 mm
        0 … 100 mm
        0 … 150 mm

        Signal output Depending on excitation voltage
        Protection class IP40
        Range of operating temperature -30 ... +100 °C
        Supply voltage Depending on measuring range
        Electrical connection

        8710
        5 pins plug connection

        8711
        Integrated connection cable 1 m
        Integrated connection cable 3 m
        Integrated connection cable 5 m

        Return spring No
        Specific characteristics

        • Service life: 108 movements
        • Displacement speed: up to 10 m/s
        • Drive free of lateral forces caused by ball joint coupling
      • Description

        Displacement sensors models 8710 and 8711 with resistance tracks made of conductive plastic material are designed for a direct and accurate measuring of mechanical displacements. A special ball joint coupling is mountable on both ends of the driving rod. Because of this the sensor may be used free of clearance or lateral forces also with angular or parallel misalignment between sensor and measuring device.

        A special multi-fingered slider provides a good electrical contact also at high adjustment speeds or vibrations.

        Areas of application are:

        • Electromagnets
        • Switch and button deflections
        • Pneumatic cylinders
        • Press-fits (longitudinal press-fits)
        • Hydraulic cylinders
        • Measurements of deformation and bending
        • Length tolerances
        • Feeding paths

        Due to the technology employed in potentiometric displacement sensors, they always operate with a sliding contact system. Special processes are applied to give the resistance tracks low friction, low tendency to stick/slip, resistance to abrasion and long-term stability.

        The driving rods are guided in long-life, low-friction sliding bearings with close tolerances; this results in highly precise measurements. Lateral forces reduce the service life and can be avoided by using, for instance, ball joint couplings, included in the burster product range.

        Due to the pump effect, the driving rod has double sliding bearings.

        Mounting

        The sensor is mounted at the left and right longitudinal slot by four mounting angles.

        These slots (W = 2.2 mm, D = 1.6 mm) are closed at the side of the electrical connector.

      • Data Sheet & Downloads

        Data sheet
        Further info



      Brandnew Brochure: Load cells

      Discover our new brochure Load cells for production, automation, R&D and quality assurance with many application examples and product focused information!

      Download our new brochure

      burster in Malta

      Malta

      burster Italia S.r.l.

      Via Repubblica, 10
      24035 Curno
      Italy

      Fon: +309 035 618120
      Fax: +39 035618250
      infoburster.it
      www.burster.it

      SERVICES

      • Qualified design, application support
      • Process optimization
      • Qualified integration support & training
      • On-site trouble shooting
      • Qualified phone & online support
      • Local calibration service
      ×
      © 2024 // burster Italia s.r.l.
      nach oben